Dri-Eaz, Dehumidifier, PHD 200

Dri-Eaz PHD200 Dehumidifier

Your Compact Space Dehumidification Solution

The Dri-Eaz PHD200 replaces the CMC100 Dehumidifier. This product is perfect for compact areas such as:

• Basements
• Crawl Spaces
• Warehouses
• Marine Environments
• Attics

2 Dehumidifying Modes

The Dri-Eaz PHD 200 Dehumidifier features 2 operating modes: humidistat and continuous operation. Humidistat mode maximizes moisture removal efficiency by maintaining a preset humidity level in your workspace. Once you set your desired humidity level, the dehumidifier's compressor cycles on and off to maintain that level while the fan continues running for more accurate humidity measurement. Use continuous mode when you need to reduce the humidity in your space fast with no downtime. Your space's temperature and relative humidity is displayed on the control panel in real time for convenient tracking.

Additional Features

• Digital Control Panel - The Dri-Eaz PHD200 Compact Dehumidifier's electronic control panel displays the inlet and outlet temperatures, the relative humidity of the space, and tracks job and life hours. It also features a purge control for the condensate pump reservoir.
• Mesh Air Filter - The dehumidifier is equipped with a mesh particle filter, which captures harmful particles.
• Internal Condensate Pump and Drain Hose - A high-power condensate pump lifts out collected moisture up to 3 feet and drains it through a 20-foot drain hose (included).
• Fast Access for Maintenance - The PHD200 was designed to be easily and quickly disassembled for regular maintenance and cleaning. All you need is a few tools.
• Operating Temperature Range - This unit operates in temperatures as low as 45 degrees F and as high as 100 degrees F and features an automatic defrost system.
• Self-Diagnostic Test System - An onboard self-diagnostic system runs each time the dehumidifier is powered on to check for potential issues and ensure smooth operation.
• Automatic Restart On Power Failure - Upon a loss of power, the PHD200 will automatically resume operation when power returns.

• Product Type: Dehumidifier
• Color: Gray
• Material: Polyethylene
• Length: 21.5 in
• Width: 12.5 in
• Height: 17.6 in
• Series/Model: PHD 200
• Temperature Rating: 45 to 100 deg F
• Voltage Rating: 115 V
• Amperage Rating: 6.2 A
• Air Flow Capacity: 180 cfm
• Frequency Rating: 60 Hz
• Humidity: 60 to 90% RH
• Noise Reduction Rate (NRR): 55 dB
• Water Usage Rate: 74/120 pt/day
• Weight: 65.000
• Warranty: Limited