We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Metzger/ McGuire, Joint Filler, Edge Pro 80, 600 ML, Ryno Gray
SKU #:
177008
Catalog #:
1608-7076
Edge-Pro 80 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 80is a rubberlike solid with a hardness of Shore A 80-81.
Basic Use
Edge-Pro 80 was developed to fill and protect joints in exposed concrete retail floors and in moderate-duty warehouse concrete floors. Its primary function is to protect joint edges from spalling under material handling vehicle traffic. Edge-Pro 80is intended for use where final operating temperatures are from -20°F (-29°C) to +120°F (49°C).
Other Uses
Edge-Pro 80 is also ideal for filling random cracks in exposed concrete retail floors and in moderate-duty warehouse concrete floors.
Limitations
Edge-Pro 80 is not recommended for use under VCT or other non-breathable flooring systems.
Edge-Pro 80 is designed for interior use and may not be suitable for outdoor applications due to thermal movement.
Correct Joint Design/Installation
Edge-Pro 80 should be installed full joint depth in saw- cut contraction/control joints (or 2†minimum in saw-cut joints exceeding 2†in depth) per PCA and ACI guidelines.
Advantages
Edge-Pro 80’s revolutionary new chemistry provides for superior substrate adhesion, moisture tolerance and a flusher finished profile compared to similar polyurea joint fillers.
Edge-Pro 80 Finishes Flusher with the Floor Surface
Edge-Pro 80’s chemistry permits for a wide shave window (15 min. to 24 hrs.) in which the installer can razor off overfill and achieve a consistently flush profile with floor surface.
Edge-Pro 80 is Moisture Tolerant
Edge-Pro 80 will not react with moisture and its special adhesion enhancers permit adhesion to damp substrates with minimal compromise as compared to dry substrates.
Edge-Pro 80 is Colorfast
Edge-Pro 80 maintains a consistent color profile and resists fading or discoloration under normal conditions.
Edge-Pro 80 is Ideal for Use in Stained/Polished Concrete Floors
Edge-Pro 80 can be ground and polished as early as 30 minutes (wet) and 3 to 4 hours (dry).
Color, Packaging and Accessories
Edge-Pro 80 is available in a neutral color which can be mixed with color packs to create 13 Popular Colors commonly used in retail exposed concrete floors. Available in 10 gallon (US) kits (2-5 gallon US pails) and 600 ML (300:300) dual cartridge kits.
Applicable Specifications
There are no government or ASTM standards for semi-rigid floor joint fillers. Edge-Pro 80 meets or exceeds the floor joint filler guidelines set forth by the American Concrete Institute’s technical committee guides 301-10, 302.1R-15, 310R-13, 360R-10 and the Portland Cement Association’s (PCA) Concrete Floors on Ground (2008).
USDA/FDA/CFIA/LEED® Approval
Edge-Pro 80 is acceptable for use in USDA, FDA, and CFIA regulated facilities. Edge-Pro 80 contains no VOC’s and is fully compliant with USGBC LEED® green building standards.
- Product Type: Concrete Floor Joint Filler
- Color: Ryno Gray
- Size: 600 mL
- Form: Liquid
- Odor/Scent: Amine-like
- Composition: 5 to 15% Diethylmethylbenzenediamine, 5 to 10% Tetrahydroxypropylethylendiamine
- Container Type: Dual Cartridge Kit
- Viscosity: 1000 to 3000 cPs
- Weight: 0.470
- Warranty: 1 Year
SKU | 177008 |
---|---|
Catalog # | 1608-7076 |
Pack Size | 1/ea |
UOM | ea |