Spray gun used on HydroForce AS08 & AS08R injection sprayers, SX-12 & Gekko Tool, and Omni Pro sprayers. Rated at 2600psi & 7gpm Repair parts: Valve -...

Brush Skirt for the Hydro-Force SX-12 Installation Instructions: Use a heat lamp or place in hot water to soften skirt and then snap onto the base of...

Hydro-Force SX-12 The latest technology for cleaning tile and grout! The SX-12 blasts soil and dirt from tile, grout, and smooth or rough hard...

Hard Boot Kit for the SX-12 Tile Cleaning Tool

Helpful Hints: When used in carpet and upholstery cleaning equipment, brass jets should be replaced every six months and stainless jets once a year....

Brass Close Nipple - ¼"

Brass Face Bushing - 3/8" MPT × ¼" FPT

Brass Elbow - ¼" MPT × ¼" T

Brass 45° Street Elbow - ¼" FPT × ¼" MPT

Brass Street Elbow - ¼" MPT × ¼" FPT

Rated at 2600psi & 7gpm Spray gun used on HydroForce AS08 & AS08R injection sprayers, SX-12 & Gekko Tool, and Omni Pro sprayers. Repair parts: Valve -...

Repair kit for Valves NA031A & NA0847 in Spray Guns 100010 & NA032.

Rated at 2600psi & 7gpm Spray gun used on HydroForce AS08 & AS08R injection sprayers, SX-12 & Gekko Tool, and Omni Pro sprayers. Repair parts: Valve -...

Brass Strainer/Jet Body - ¼" MPT

100 Mesh Strainer without Check Valve

Brass Strainer Adapter

Handle assembly for SX-12.

1" × 9" Vacuum Hose for theSX-12 Tile Cleaning Tool.

Vacuum Relief Ring for theSX-7 Hand-Held Tile Cleaning Tool and the SX-12 Tile Cleaning Tool.

Solution hose for SX-12 Tile Cleaning Tool - AW104 3/16" X 48" HP Hose with 1/4" MPT X 1/4FT hose ends *Notice: Maximum temperature rating of 212°